Zellamid® 1500 X

PEEK, brown / black

Two parallel beige cylindrical rods resting on a flat rectangular base, isolated on a white background.

ZELLAMID® 1500 X PEEK is a high-temperature resistant thermoplastic high-performance polymer. With a glass transition temperature of around 150 °C and a melting temperature of approximately 340 °C, it impresses with its exceptional thermal stability.

PEEK is one of the most powerful thermoplastics worldwide and is used wherever the highest demands are placed on temperature resistance as well as mechanical and chemical durability. As a high-strength alternative to fluoropolymers, the material impresses with significantly lower wear and excellent tribological properties.

All technical data is available for download here.

Technical data

Properties

• High temperature resistance up to +260 °C,
briefly up to +300 °C
• Excellent mechanical properties even at low
temperatures down to −60 °C
• High hydrolysis resistance
• Very good resistance to many organic and
inorganic chemicals
• Excellent sliding behavior under high surface
pressure and sliding speed
• Very resistant to high-energy radiation (gamma
and X-rays)
• Self-extinguishing, UL-94 V0 fire behavior, low
smoke development
• Unfilled ZELLAMID® 1500 X semi-finished
products are approved according to FDA and EU
10/2011 for contact with food

Applications

• Sealing rings
• Plain bearings and sliding strips
• Piston rings
• Pump housings
• Gear parts
• Impellers
• Electronic components
• Connectors
• Highly stressed components
• Brake systems

ZELLAMID® 1500 X sheets
ZELLAMID® 1500 X solid rods

ZELLAMID® 1500 XT - black
10% carbon fiber, 10% graphite, 10% PTFE

Exceptionally good tribological properties combined with high wear resistance and a very low coefficient of friction make this material the ideal solution for heavily stressed plain bearing applications.

ZELLAMID® 1500 XGF30 - brown
30% Glass Fiber

This glass fiber reinforced type significantly reduces the coefficient of thermal expansion compared to unreinforced PEEK while simultaneously increasing the modulus of elasticity. Ideal for applications requiring high stiffness, static load, and improved dimensional stability at temperatures above 150 °C.

on request:

ZELLAMID® 1500 X tubes and further dimensions.